Drive ShowFlo from outside
A ShowFlo project can receive OSC and MIDI messages and react to them: GO, STOP, PAUSE,
playhead jumps, writing a value into a cue. Everything is set in Settings (Ctrl+,) → TRIGGERS
tab (Réglages → DÉCLENCHEURS in the current French interface), and is saved in the project’s
.sflo file.
1. Turn on a source
Section titled “1. Turn on a source”| Source | Setting |
|---|---|
| Incoming OSC | “Listen” box and a UDP port (8766 by default; 9000 is often taken by MadMapper, Reaper or TouchDesigner) |
| Incoming MIDI | “Listen” box and one of the project’s MIDI input ports |
The status shows on the right: “listening”, “stopped”, or the error (port already in use, device unplugged). Settings belong to the project: opening another project stops its sources and starts the new one’s.
2. Create a trigger
Section titled “2. Create a trigger”- Click Add. A line appears: OSC source, action “GO (playhead)”.
- The easiest way: select the line, click Learn, then press the button on your control surface, or send the OSC message. The filter fills itself in.
- Choose the action and, if it needs one, the target cue or group.
- If needed, a debounce in milliseconds: a button or sensor that repeats its message will send only one GO per time window.
The “Last event received” monitor always shows what ShowFlo hears.
The filter
Section titled “The filter”It can also be edited by hand, with a double-click in the Filter column.
| Source | Syntax | Examples |
|---|---|---|
| OSC | /address [arguments…], with * and ? wildcards in the address |
/showflo/go, /desk/*, /cue 3 |
| MIDI | type [chN] [number]; a missing part matches anything |
note_on ch1 60, control_change ch1 7, note_on |
A note_on with velocity 0 counts as a note_off and fires nothing. An empty filter catches
nothing.
3. Actions
Section titled “3. Actions”| Action | Effect |
|---|---|
| GO (playhead) | like the Space bar |
| GO on a cue | fires the target cue without touching the playhead |
| STOP, PAUSE, RESUME all | like the toolbar buttons |
| PAUSE / RESUME | a single key: pause if something plays, resume if something is paused |
| STOP, PAUSE, RESUME a cue | on the target cue only |
| Playhead to a cue | moves the playhead without firing anything |
| Write a value into a cue | puts the received value, rescaled, into a field of the target cue |
| MIDI panic | silences every held note on the project’s MIDI ports |
| Follow received MSC | a MIDI Show Control console drives ShowFlo: GO 12 fires cue number 12 |